Daemon Prince - How I Painted Mine

Daemon Prince

When Games-Workshop released this new model, I knew I had to get my hands on one of them. The model is really what I had imagined how a Daemon Prince would be. Muscles out of proportions, a menacing face, sharp teeth, pointy horns, wings and of course, a big sword. Out from the box, you could either arm the Daemon Prince for Warhammer Fantasy Battles or Warhammer 40k. From the picture above, you can see that I've armed the Daemon Prince for Warhammer Fantasy Battles (it's the base that determines that :P ). Please note that the paints I used are mostly the old paints from Games-Workshop.

What is used

First off, preparations for the whole task. Get a good table for painting with good lighting. Next, have a set of brushes. I have with me, fine detail brush, a normal size 1 brush, small flat brush for dry brushing and another one which is bigger. I have a cup with water readied and these are the paints that I will use:

• Chaos Black
• Blood Red
• Blazing Orange
• Sunburst Yellow
• Chainmail (the colour)
• Beastial Brown
• Bleached Bone
• Skull White
• Goblin Green
• Regal Blue 
• Dwarf Flesh
• Shining Gold
• Flesh Wash (will be used a lot)

Starting from the base

As with my entire army, I would start off with the lava base first. In addition to this base, I used one of the trophy racks and glued it in front of the Daemon Prince. The Chaos icon, I glued it facing to the back. With just that, I've completed the base for my Daemon Prince.

Gluing Parts Together

While the base is left to dry, I started of by picking the parts which I would use for my Daemon Prince. First I would choose the head, I like the one with long straight horns and with many sharp teeth! Next, for the right arm, of course I picked the big sword over the axe. I don't have any options for the left arm, torso and legs. I would not be gluing the wings to the body yet so I'll just leave them aside. After selecting the parts that I wanted to use for the Daemon Prince, next I'll be cleaning these selected parts. By cleaning, I would mean filing off the mould lines. We wouldn't want these lines to be visible when the model is finished. About half-hour passed, mould lines cleared away, I'm ready to glue the selected parts together. 

Undercoat

I would make sure that the glue is completely dry before I start to undercoat my models. A lot of people would use Citadel Chaos Black or Games-Workshop's black spay to undercoat their models. I didn't have Games-Workshop's spray paints and I didn't want to use much of my Chaos Black as undercoat. I did, however have those aerosol sprays which I could easily get from hardware stores. I used the Flat Black. Holding the spray about one foot away from my Daemon Prince, I started spraying to an open area on the right and then across to the left through my model in a gentle stroke. Ensuring the same thickness throughout the sprayed area. Keep repeating the same process from different angles till the whole model is fully covered in black paint. At the same time, I would also undercoat the wings which were not glued on the Daemon Prince yet.

Daemon Prince - Left View

Base Paint

RED. Definitely red for the skin. Most probably because the Daemon Prince looked more affirmed to Khorne than the other chaos gods. Also it would look really awesome when fielded along with my bloodletters in the field. I wanted my Daemon Prince to have a darkish grim look. So, straight out from the pot, Blood Red, dry brush the whole model. Yes. I did it with the most simplest of method but with this model, it has many large and small areas. So on different locations, different sizes of brush would be used. I would avoid having too much paint on the areas in between muscles or joints to maintain the dark look and not too thick. For the wings, I dry brushed the the wing's forearms and the "fingers" with Blood Red. For the horns, plates on the back, claws on the wings, claws on feet and teeth are painted with Bleached Bone.

Hightlight

For highlighting, I chose Blazing Orange to just dry brush on the highest areas of the muscles, the face joints. These would bring out the Blood Red base colours and make the skin look less bland. For the parts that was painted with Bleached Bone, I had Skull White mixed with Bleached Bone and add in water to dilute the mixture. Then lightly paint them on the edges of the areas with Bleach Bone to bring out more of the colour. As it was diluted, the first layer should almost be unseen as more layers you do, it would be more obvious. After that's done, I proceed on to the wings.

Daemon Prince - Back View

Wings

As for the wings I chose not to do a conventional style of painting but to opt for a more darkish shiny style. The wing's forearms and "fingers" are already painted so what's left are only the membrane area. What I did was to use Dwarf Flesh as the base colour for the membrane. Dry brush the whole area with it. Then I used Flesh Wash, first diluted with water, paint it over the parts painted with Dwarf Flesh. The next layer I used the Flesh Wash right out from the pot directly on to it. Slowly when this area dries, it gives a dark brownish yet shiny as seen in the picture above.

Claws, Plates and Horns

Next up are the horns, claws and plates on the back of the Daemon Prince. These are already painted with Bleached Bone and highlighted. The next thing I wish to add are layers of of brownish colour that connects between these claws and the skin and in between the plates. I use diluted Flesh Wash to have this effect. I made sure that it's pretty this as the Flesh Wash is pretty dark especially on lighter colours. So I had more layers of this on to the areas nearest to the skin and less towards the middle of the claws. With that done, I pretty much have my Daemon Prince almost completed.

Daemon Prince - Sword and Horns

The Sword

What would be a sword that is held by a Daemon Prince. In my mind it would not be a normal metal sword but a sword that was forged in the realm of chaos. The sword already comes with runes carved into it. So I decided to have the sword to be in black but the runes clearly visible. So to spark the contract of colours, I chose to have green and yellow to be in the deep of those carved runes. I used Goblin Green that was added with Skull White and Sunburst Yellow. The embossed area of the runes I used Regal Blue as I still want to maintain a contrasting colour to the runes. And finally a few layers of thick Chaos Black on to the whole blade. For the hilt, I painted over it a slightly thinned Chainmail (it name of the colour) and then again slightly thinned Flesh Wash. This would leave it to have some sort of rusted / golden colour to it. Then handle painted with Beastial Brown and washed with Flesh Wash out of the pot. At the end of the sword is a skull which is painted with Bleach Bone and washed lightly with Flesh Wash.

Other Details

Now comes all the small details or added effects on the entire model. There are quite a number of shapes and arrows or diamond shapes around the skin of the model which I have decided to paint gold on them. Make it look more Khornish and also brings out the model. So I painted these carefully leaving a tiny gap from the undercoat black with Shining Gold.By doing this, as you can see from the picture above, the gold looks apart from the skin and horn making it stand out more. Then I painted Blazing Orange for the eyes to have that scary daemonic eyes that stare at people. Lastly the bracers, I chose to leave it black but to have the chaos symbol to be painted in Sunburst Yellow and Shining Gold at the middle part of the symbol. With that, the Daemon Prince is complete but wait, there's still more painting to do. At the base, I've added in the half-symbol and the trophy rack. These two are painted with Chainmail (the colour, again) and then washed with Flesh Wash (using this a little too much). Also on the trophy rack, some of the parts I added with a little bit of Shining Gold, and painted the skull with Bleached Bone. The thigh of the Daemon Prince look a bit too plain but luckily from the box they added the plates that would cover up the whole thigh area. I dry brushed them with Chainmail and then washed a few times with very diluted Flesh Wash. Finally the cloth on the groin area. I painted the cloth with Blood Red and then highlighted it with Blazing Orange. The metal parts of this piece is painted with Chainmail and washed with Flesh Wash. The teeth or claws that was attached to it was painted with Bleached Bone. Nothing too fancy but enough to add a little more flavour at the lower part of the whole model. So with that, sit back and enjoy the completed Daemon Prince of Chaos.

Daemon Prince - lower section

Herald of Khorne – Daemons of Chaos Hero

One of the most capable hero class characters for Daemons of Chaos is the Herald of Khorne. There are a lot of good reasons to it and especially when you're fielding the herald with Bloodletters, the effectiveness of the unit. Here's a list of reasons why I would say that the Herald is a good character for your Daemons of Chaos army.

Herald of Khorne

 

Good Basic Stats

The herald comes with very good basic stats. High weapon skill, high strength, high initiative. These three stats are what is wanted for you to kill off your opponents effectively. High initiative means that a lot of times, you get to hit your opponent first. That means less chance for your opponents to hit you back especially in a challenge where you kill your challenger straight off. High weapon skill will enable you to make sure that you have a 66% chance of hitting your target. Don't forget, the herald also have the hatred rule, this enables you to re-roll the 33% that you missed! High strength does what it does best, wound you opponent easily. Don't forget the Killing Blow ability which could outright kill off a character and gives your victims no armour saves.

Abilities

• Hatred. The ability to re-roll missed to-hit rolls in close combat. You would want to maximize the number of hits by this guy. This is one of the big plus why you have to have him in your army.
• Locus of Khorne. Join the Herald of Khorne into a unit of Bloodletters or Bloodcrushers. The whole unit will now have the Hatred rule. Now the whole unit is really boosted up with the presence of the herald.
• Killing Blow. One of the most feared skills by characters and cavalry. It allows no armour saves and kills off the target regardless of how many wounds left. Unless your opponent is immune to killing blow, they would have this in mind when they face the herald.
• Magic Resistance (1). Although it doesn't seem much but if your herald is running alone, you'll need every single protection from shooting and magic missiles. This won't help you with shooting but it would increase your defence against magic by increasing your ward saves.

Chaos Gifts

• Armour of Khorne. Daemons normally do not have any armour saves but being under Khorne, the herald gets to equip himself with Armour of Khorne. This armour gives you 3+ armour saves which would enhance your survivability.
• Daemonic Robes. This gift is hardly used as it does not give any armour saves but gives your herald a better surviving chance against high strength opponents and against warmachines.
• Etherblade. This gift of a weapon ignores the target's armour saves but why need to spend additional points when you already have a killing blow that ignores armour saves? I would rather spend the points on other gifts or points for the army.
• Firestorm Blade. This is a fairly common gift that is given to the herald but it is also double edged as if your opponent is very sure that you would equip your herald with this gift, they could equip their characters against flaming attacks. This would render your herald ineffective against them. On the other side, you can negate regeneration and with strength seven, you could even slay monsters (only easier).
• Obsidian Armour. An expensive armour that negates magical weapons against him but also gives a good 3+ armour saves. I wouldn't recommend it due to the high costing value.
• Soul Hunger. The Herald of Khorne have only 3 attacks. So with high weapon skill, Hatred, strength six, Killing Blow, I think Soul Hunger would be overkill to ensure that all 3 attacks would wound.

Herald of Khorne

Battle Standard Bearer

The Khorne Herald can also be the army battle standard bearer. The reason is simple because it allows you to re-roll a sudden bad roll on a instability test and of course of the magical icons that you could carry with it. As the herald usually joins a unit of Bloodletters or Bloodcrushers, it is very useful to be able to re-roll bad rolls on instability tests. Especially when you lose combat, re-rolling those high rolls or even rolling doubles 1s would save the unit. The icons that the herald could carry are only five:

• Banner of Hellfire. It contains a bound spell of power 5 that deals D6 strenghth six hits to all nearby enemies. Sounds pretty awesome but at the cost of another herald! Apart from that, it would require you to use up 2 power dice to cast it (effectively unless you wish to try a single 33% dice roll). Too expensive to carry and eats up power dice which is important for your other wizards. This banner is meant for 7^th edition and before.
• Banner of Unholy Victory. In the days where you can now always attack in 2 or 3 ranks (horde), static combat resolution has not been very important. It would make a difference only if your opponent would be as destructive as your unit in close combat.
• Great Icon of Despair. My favourite icon. This icon has given a lot of opponents a lot of headache when they have to take fear tests at -2 to their leadership. Very useful against opponents with leadership value of 8 and below. Look at your opponent's face when they have to take their leadership at -2.
• Great Standard of Sundering. Another banner that is really good against opponents that would concentrate much on magic. Especially after deployment has been done, only that you reveal you have this ability. Reduces their ability to cast spells and oh... remember not to have your own wizards to have spell of light.
• Standard of Chaos Glory. A great banner if you wish to tarpit your opponent's unit. It costs a bomb but sometimes could help out with you have to slowly grind away your opponent. Otherwise if you would win in most close combat situations, this banner would be a waste.

Conclusion

The Herald of Khorne is always a good addition to your Daemons of Chaos army. Always put him either in a unit of Bloodletters or Bloodcrushers and he will not only help increase the effectiveness of the unit but also being able to survive and perform. He is not the most toughest character in Warhammer Fantasy Battles but he is certainly one of the most cost effective character.

Bending Plastic – Hair Dryer Method

Have you ever had problems with ranking up your models in a unit? Have you ever wished that some of your plastic models were posed differently? Have you ever wanted your model's arms would bend slightly higher? Wanted so much but never thought of how to accomplish that? Bend it! Of course, you don't just bend it with your bare hands, that would break them. So how do we do that without damaging the model?

CAUTION: The method below can and have a chance of damaging your model. Proceed with this method with caution and at your own risk. The owner of this article will not be responsible for any damages caused by following the methods described.

Okay, now that you've read the caution above, please follow the steps here very carefully. Also be very careful as not to cause yourself harm as it will deal with HEAT.

Hair-dryer with custom paper nozzle

First, get yourself a hair dryer. A normal heat producing hair dryer would do. As you can see in the picture above, I used a normal hair dryer but attached to it is a custom made nozzle. Next, get a piece of paper. I would suggest to use A4 sized paper. Roll it up into a cone shape and tape it up that the shape would not go loose. Then you can use a rubber band and tie the nozzle to the hair dryer like in the picture. With that, you're ready to bend!

At this point, you're messing with elements of danger. Both to you and your plastic model. Get yourself a pair of gloves which you know could withstand heat. Wear them.

Bent banner can be used as cloak

Next, place the hair-dryer on the table with the nozzle facing away from you. Make sure you do not have anything else in front of the nozzle area. This is because when you switch on the hair-dryer, the wind will blow away a lot of stuff in front of it. Once you have a clear space in front of the hair-dryer, try switching it on. If the hair-dryer moves, try to anchor it with something (a book or anything that could weigh it down). Switch it off and prepare your model.

Once you are ready, switch the hair-dryer on, move your model with the intended part to bend to the nozzle. Hold it gently but not too soft that the model will get blown off by the wind. Pay careful attention to your model. If the part you wish to bend is very thin, you have to be very careful as the heat might soften the plastic very quickly and bend by itself or worse, melted off! If the plastic part you wish to be is at the size of a normal Empire human plastic model's arm, it will take a few seconds before the plastic softens up for you to bend.

Reposition model to pose in the way you wanted

Try put around 5 seconds and move it away from the hair-dryer and try to use some light force to bend it to the direction that you want. If it's still hard, then put it to the hot air again. Repeat this a few times till if softens up a bit that you can slowly bend it the way you wanted.

This method requires practise and I would suggest that you try it with the plastic sprues first and not on your actual model. Different brands of hair-dryer or different sizes may vary in terms of heat strength and effectiveness.

Flamers of Tzeentch – Quick Painting Guide

Completed Flamer

Here's a quick and easy way to paint your flamers. It will be acceptable to field in battle and a nice addition to your Daemons army. In this example, I had already completed the base and left with the flamer model itself.

What do you need:

Flamer Model

Brush for base painting

Brush for details

Brush for dry brushing

Spray Paint (black, optional)

Chaos Black

Skull White

Regal Blue

Red Gore

Blazing Orange

Golden Yellow

Beastial Brown

Ogryn Flesh / Flesh Wash (optional)

First off, prime your flamer black. You could spray coat it as I have done here or your could undercoat it with Chaos Black.

Lower part painted with Regal Blue

Next, use Regal Blue to paint the lower part of the flamer. Leave the parts with the fangs untouched. Just paint the lower half skin area.

Red Gore for the upper part

Paint Red Gore to the upper part of the flamer. Leave out the flames and the fangs areas.

Dry Brush mix of Regal Blue and Skull White

Next mix Regal Blue and Skull White to a ratio of 70:30. Dry brush the mixture over the initial lower part painted with Regal Blue. Make sure you dry brush the border between Regal Blue and Red Gore. This will be the part where it will have the blending look from red to blue. Then have another mixture of 30:70 Regal Blue and Skull White. Dry brush lightly on the same location as this would be the highlight of the skin areas. You can also do the same on the tentacles for the lower parts.

Dry Brush Blood Red then Blazing Orange

Dry brush Blood Red all over the areas of the Red Gore. This will bring up all the muscle tones of the flamer. After that is completed, get Blazing Orange and dry brush it lightly over the highest parts of the muscles and skin. The Blazing Orange would be the highlight areas of your flamer.

Details Painted

Now for the details of your flamer. Have a mixture of Red Gore and Skull White to a ratio of 30:70 and paint the tongues of your flamer. Paint Beastial Brown on the gums of the fangs and Bleached Bone for the fangs. You can then wash the gum area with watered down Ogryn Flesh or Flesh Wash.

Flames Painted

Finally the flames on the flamers. Paint the whole flames area with Golden Yellow. Next, dry brush the flames with Blazing Orange. Don't cover the Golden Yellow part entirely. Allow the deep areas to be untouched. Next dry brush lightly with Beastial Brown on the flames. Lastly, dry brush Chaos Black very lightly the areas of the Beastial Brown.

Lore of Light – Magic for Empire

The Lore of Light, as described in the rulebook as the lore that exceeds in scourging and destruction of supernatural creatures. The Empire constantly fights against undead and Daemons of Chaos. So how would Lore of Light help the Empire win battles? Here's a simple description of how to use Lore of Light in the Empire's battle against the supernatural.

Shem's Burning Gaze

The most basic spell in the lore. Magic missile. It is very easy to cast, have decent range and does flaming attack. Against the undead or daemons, the lore attribute changes the spell to hit an additional D6 number of hits. If you feel that Strength 4 may not be enough, boost it up and raise the strength to 6. With 2D6 number of hits, on average, you would be able to do about 6 wounds against normal troops.

Pha's Protection

This spell increase the survivability of Empire troops by a lot. This is increased even more coupled with The Speed of Light (explained later). Not only it helps during close combat but any range shooting would suffer an additional penalty to shoot at the unit. Even warmachines that doesn't require a Ballistic Skill would drop it's chances to 50% to shoot at the unit. Especially useful to protect Empire's “hammer” or “anvil” from enemy fire. Remember, Empire troops die easy.

The Speed of Light

This spell increases the target unit's Weapon Skill and Initiative to 10. That would mean that even the most skilled warriors would only have 50% chance of hitting the unit. If possible, stack Pha's Protection on them and make them even more harder to hit, reducing the opponent's chance to hit to a mere 33%. That would increase the survivability of the unit and also to hit back against your opponent. Very useful against High Elves even though they may strike first but then they cannot re-roll against your high initiative.

Light of Battle

Empire troops have low leadership and it is not uncommon for units to panic or break in combat. This spell could be a lifesaver because it automatically rallies the fleeing unit. Furthermore, this unit will pass any leadership test until the caster's next magic phase. There had been many cases when a unit flees causing a chain reaction to other units to flee as well. Cast the boosted version and all those fleeing units would rally. Don't underestimate this spell especially when you play a list where your units are not accompanied by characters or army general nearby.

Net of Amyntok

I have found this spell to be very useful when playing against Tomb Kings or High Elves or Dark Elves who likes to field a huge number of archers in a unit. In order for them to shoot, it forces them to take a Strength test of which failing the test would disable them from shooting at your unit. Another of it's usefulness is to prevent opponent's redirectors from blocking or manoeuvre against you. Empire big blocks are pretty difficult to move around terrains and a lot of times, opponents would use redirectors to redirect out main unit from our intended location.

Banishment

Though it may sound like just a mere magic missile of Strength 4, this spell deals 2D6 hits and forces the target to re-roll successful ward saves. Sometimes we would face our opponent's characters leaving their unit for some strategic (or foolish) purpose. That's the right time to cast this spell on them and though they may think that they have ward saves to protect them but when they are forced to re-roll their successful saves, it may not be so safe any more.

Birona's Timewarp

This spell turns any Empire unit into formidable warriors with additional attack and always strike first and it last until the caster's next magic phase. So if you managed to cast this spell at a unit that has successfully charged a unit, they would be ensured to have the effect for two rounds of close combat. Stack The Speed of Light with them and you'll have a unit that hits well with re-rolls.

When you plan to choose Lore of Light for your wizard, always bear in mind to have a plan ahead of your battles. Determine the right moment and right sequence to cast your spells. Especially those which you can stack the effects and cause your unit to be very formidable in close combat. The best part is that we can also have the Empire War Altar which casts the Lore of Light spells at bound power 5. Though easily dispelled but reserve some of the dice so that you would be able to get off the spells to your advantage.